AD7467 |
RFQ for AD7467 Required Field |
 |
| Technical/Catalog Information | AD7467BRM |
| Vendor | Analog Devices Inc |
| Category | Integrated Circuits (ICs) |
| Number of Bits | 10 |
| Package / Case | 8-MSOP, Micro8?, 8-uMAX, 8-uSOP, |
| Data Interface | Serial |
| Packaging | Tube |
| Sampling Rate (Per Second) | 200k |
| Operating Temperature | -40°C ~ 85°C |
| Voltage Supply Source | Single |
| Number of Inputs and Type | 1 Single-Ended, Unipolar |
| Number of Converters | 1 |
| Power Dissipation (Max) | 0.9mW |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AD7467BRM AD7467BRM |
| Product | Manufacturers | Pack | D/C |
| AD7467 | Analog Devices | new | - |
The AD7466/AD7467/AD7468 are 12/10/8-bit, high speed, low power, successive-approximation ADCs respectively. The parts operate from a single 1.8 V to 3.6 V power supply and feature throughput rates up to 100 kSPS. The parts contain a low-noise, wide bandwidth track/hold amplifier which can handle input frequencies in excess of 100 kHz.
The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and the conversion is also initiated at this point. There are no pipelined delays associated with the part.
The AD7466/AD7467/AD7468 use advanced design techniques to achieve very low power dissipation at high throughput rates.
The reference for the part is taken internally from VDD. This allows the widest dynamic input range to the ADC. Thus the analog input range for the part is 0 to VDD. The conversion rate is determined by the SCLK.
Typical Application |
Features |
| Battery Powered SystemsMedical InstrumentsRamote Data AcquisitionIsolated Data Acquisition | Specified for VDD of 1.8 V to 3.6 VLow Power:0.9 mW max at 60 kSPS with 3.6 V Supplies0.4 mW max at 100 kSPS with 1.8 V SuppliesFast Throughput Rate: 100 kSPSWide Input Bandwidth:70dB SNR at 30 kHz Input FrequencyFlexible Power/Serial Clock Speed ManagementNo Pipeline DelaysHigh Speed Serial InterfaceSPI/QSPI/mWire/DSP CompatibleStandby Mode: 0.5 A max6-Lead SOT-23 Package and 8 lead SOIC |
| Models | MFG | Pack |
| AD7001AS | ||
| AD7001ES | ||
| AD705SQ | ||
| AD705SQ/883 | ||
| AD705TQ | ||
| AD705TQ/883 | ||
| AD705TQ/883B | ||
| AD706 | Analog Devices | |
| AD706A | ||
| AD706A/JR | ||
| AD706AN | ||
| AD706AQ | ||
| AD706AR | ||
| AD706AR/JR | ||
| AD706AR-REEL | ||
| AD706AR-REEL7 | ||
| AD706ARZ | ||
| AD706BQ | ||
| AD706C | ||
| AD706J |
